References

  1. H.P. Rosegrant, M.W. Binswanger, Markets in tradable water rights: potential for efficiency gains in developing country water resource allocation, World Dev., 22 (1994) 1613–1625.
  2. A.K. Plappally, J.H. Lienhard, Costs for water supply, treatment, end-use and reclamation, Desal. Wat. Treat., 51 (2013) 200–232.
  3. A. Plappally, A. Hasija, J. Kusins, M. Jhaver, A. Chee, Water use and related costs at households in western and northern parts of India, Hydrol. Curr. Res., 4 (2013) 2.
  4. B. Saraswati, Pottery-Making Cultures and Indian Civilization, Abhinav Publications, Newdelhi, India, 1978.
  5. W.M. Carty, P.W. Lednor, Monolithic ceramics and heterogeneous catalysts: honeycombs and foams, Curr. Opin. Solid State Mater. Sci., 1 (1996) 88–95.
  6. M.D. Sobsey, C.E. Stauber, L.M. Casanova, J.M. Brown, M.A. Elliott, Point of use household drinking water filtration: a practical, effective solution for providing sustained access to safe drinking water in the developing world, Environ. Sci. Technol., 42 (2008) 4261–4267.
  7. S. Gupta, A. Kaurwar, R.K. Satankar, K. Usha, A.K. Plappally, Flow, filtration and petro physical properties of ceramic plate ware gravity water filter and its variation with long term cyclic water loading, In Proceedings of from Pollution to Purification (International Conference on Water 2016), Organized by IUIC, ASCEED & School of Environmental Sciences, Mahatma Gandhi University, Kottayam, 2016.
  8. Available from http://www2.ichcap.org/publications-archive/contribution-of-intangible-cultural-heritage-to-sustainabledevelopment-in-south-asia/.
  9. S. Murcott, Implementation, critical factors and challenges to scale-up of household drinking water treatment and safe storage systems, Cambridge, Massachusetts Institute of Technology, MA, 2006.
  10. E. Annan, K. Kan-Dapaah, S.T. Azeko, K. Mustapha, J. Asare, M.G.Z. Kana, W. Soboyejo, Clay mixtures and the mechanical properties of microporous and nanoporous ceramic water filters, J. Mater. Civ. Eng., 28 (2016) 04016105.
  11. V.C.S. Prasad, V. Ganvir, DMAIC Approach in Rural Technology—An Application to Making of Water Filters, Trans. Indian Ceram. Soc., 65 (2006) 215–221.
  12. R.M. Lark, R. Webster, Changes in variance and correlation of soil properties with scale and location: analysis using an adapted maximal overlap discrete wavelet transform, Eur. J. Soil Sci., 52 (2001) 547–562.
  13. F. Higashikawa, C. Silva, B. Wagner, Chemical and physical properties of organic residues, Rev. Bras. Cienc. Solo, 34 (2010) 1742–1752.
  14. G. Cultrone, E. Sebastián, K. Elert, M.J. De la Torre, C. Rodriguez–Navarro, Influence of mineralogy and firing temperature on the porosity of bricks, J. Eur. Ceram. Soc., 24 (2004) 547–564.
  15. F.F. Lange, Powder processing science and technology for increased reliability, J. Am. Ceram. Soc., 72 (1989) 3–15.
  16. J. Tay, Bricks manufactured from sludge, J. Environ. Eng., 113 (1987) 278–284.
  17. U. Lohbauer, F.A. Müller, A. Petschelt, Influence of surface roughness on mechanical strength of resin composite versus glass ceramic materials, Dent. Mater., 24 (2008) 250–256.
  18. J. Lawrence, L. Li, J.T. Spencer, Diode laser modification of ceramic material surface properties for improved wettability and adhesion, Appl. Surf. Sci., 138 (1999) 388–393.
  19. R. Shuttleworth, G.L.J. Bailey, The spreading of a liquid over a rough solid, Faraday Soc., 3 (1948) 16–22.
  20. A. Gajewski, Contact angle and sessile drop diameter hysteresis on metal surfaces, Int. J. Heat Mass Transfer, 51 (2008) 4628–4636.
  21. M.F. Gazulla, E. Sánchez, J.M. González, M.C. Portillo, M. Orduña, Relationship between certain ceramic roofing tile characteristics and biodeterioration, J. Eur. Ceram. Soc., 31 (2011) 2753–2761.
  22. H. Rashid, The effect of surface roughness on ceramics used in dentistry: a review of literature, Eur. J. Dent., 8 (2014) 571.
  23. A. Narasimhan, Essentials of Heat and Fluid Flow in Porous Media, CRC Press, NY, 2013.
  24. D.M. Liu, Influence of porosity and pore size on the compressive strength of porous hydroxyapatite ceramic, Ceram. Int., 23 (1997) 135–139.
  25. I. Yakub, J. Du, W.O. Soboyejo, Mechanical properties, modeling and design of porous clay ceramics, Mater. Sci. Eng., A., 558 (2012) 21–29.
  26. A.R. Boccaccini, Influence of stress concentrations on the mechanical property–porosity correlation in porous materials, J. Mater. Sci. Lett., 17 (1998) 1273–1275.
  27. S.K. Maiti, M.F. Ashby, L.J. Gibson, Fracture toughness of brittle cellular solids, Scr. Metall., 18 (1984) 213–217.
  28. P. Sin, R. Veinthal, F. Sergejev, M. Antonov, I. Stubna, Fracture toughness of ceramics fired at different temperatures, Mater. Sci., 18 (2012) 90–92.
  29. M. D’Orazio, G. Cursio, L. Graziani, L. Aquilanti, A. Osimani, F. Clementi, C. Yéprémian, V. Lariccia, S. Amoroso, Effects of water absorption and surface roughness on the bioreceptivity of ETICS compared to clay bricks, Build. Environ., 77 (2014) 20–28.
  30. H. Fischer, M. Schäfer, R. Marx, Effect of surface roughness on flexural strength of veneer ceramics, J. Dent. Res., 82 (2003) 972–975.
  31. C. Kramer, Ceramic ethnoarchaeology, Annu. Rev. Anthropol., 14 (1985) 77–102.
  32. A. Kaurwar, R. Satankar, S. Gupta, U. Aravind, K. Kothari, A. Soboyejo, A.K. Plappally, Functional demarcation of traditional off-white colored water pots manufactured from Rajasthan clayey soils and red colored water pots from Gujarat clayey soils using spectrographic, cooling and strength studies–a case study from Jodhpur, Rajasthan, India, MRS Adv., 2 (2017) 2027–2032.
  33. A.K. Plappally, I. Yakub, L.C. Brown, W.O. Soboyejo, A.B.O. Soboyejo, Physical properties of porous clay ceramicware, J. Eng. Mater. Technol., 133 (2011) 031004.
  34. D. Carroll, H.C. Starkey, Reactivity of clay minerals with acids and alkalies, Clays Clay Miner., 19 (1971) 321–333.
  35. A. Plappally, Theoretical and empirical modeling of flow, strength, leaching and micro-structural characteristics of V shaped porous ceramic water filters, Ph.D Thesis, Ohio State University, 2010.
  36. T. Degen, M. Sadki, E. Bron, U. König, G. Nénert, The highscore suite, Powder Diffr., 29 (2014) S13–S18.
  37. K.R. Lyman, C.E. Newbury, D.E. Goldstein, J. Williams, D.B. Romig Jr., A.D. Armstrong, J. Peters, Scanning Electron Microscopy, X-Ray Microanalysis and Analytical Electron Microscopy: A Laboratory Workbook, Springer, US, 2012.
  38. D. Van Halem, Ceramic silver impregnated pot filters for household drinking water treatment in developing countries, Department of Water Management, Faculty of Civil Engineering, Delft University of Technology, Netherlands, 2006.
  39. C. Carlson, S.M. Hussain, A.M. Schrand, L. Braydich-Stolle, K.L. Hess, R.L. Jones, J.J. Schlager, Unique cellular interaction of silver nanoparticles: size-dependent generation of reactive oxygen species, J. Phys. Chem., 11 (2008) 13608–13619.
  40. F.A.C. Milheiro, M.N. Freire, A.G.P. Silva, J.N.F. Holanda, Densification behaviour of a red firing Brazilian kaolinitic clay, Ceram. Int., 31 (2005) 757–763.
  41. H. Katsuki, J. Kim, S.J. Kim, S.J. Kim, J.H. Pee, W.S. Cho, Influence of alumina content in the raw clay on the sintering behavior of Karatsu ware, J. Ceram. Soc. Jpn., 124 (8) 833–837.
  42. H. Mesrar, A. Sadiki, A. Faleh, L. Quijano, L. Gaspar, A. Navas, Vertical and lateral distribution of fallout 137Cs and soil properties along representative toposequences of central Rif, Morocco, J. Environ. Radioact., 169 (2017) 27–39.
  43. A.B.O. Soboyejo, H.E. Ozkan, J.C. Papritan, W.O. Soboyejo, A new multiparameter approach to the prediction of wear rates in agricultural sprayer nozzles, J. Test. Eval., 29 (2001) 372–379.
  44. C.T. Haan, Statistical Methods in Hydrology, The Iowa State University Press, Ames, Iowa, 1994, p. 378.
  45. J. Guigue, O. Mathieu, S. Mounier, Y. Lucas, R. Laffont, P. Amiotte-Suchet, J. Lévêque, The use of 3D-Fluorescence and potential biodegradability for the comparison of extraction procedures of water-extractable organic matter in soils, Presentation at WOMS13 workshop on organic matter spectroscopy - IHSS Day at Toulon, France, 2013
  46. R.R. Pullanagari, I.J. Yule, M.P. Tuohy, M.J. Hedley, R.A. Dynes, W.M. King, In-field hyperspectral proximal sensing for estimating quality parameters of mixed pasture, Precis. Agric., 13 (2012) 351–369.
  47. C. Papachristodoulou, A. Oikonomou, K. Ioannides, K. Gravani, A study of ancient pottery by means of X-ray fluorescence spectroscopy, multivariate statistics and mineralogical analysis, Anal. Chim. Acta, 573 (2006) 347–353.
  48. J. Fu, Photocatalytic properties of TiO2–P2O5 glass ceramics, Mater. Res. Bull., 46 (2011) 2523–2526.
  49. L. Eriksson, T. Byrne, E. Johansson, J. Trygg, C. Vikström, Multi- and Megavariate Data Analysis Basic Principles and Application, Umetrics Academy, Sweden, 2013, p. 1.
  50. R. Satankar, A. Kaurwar, S. Gupta, K. Usha, S.T. Azeko, W.O. Soboyejo, A.B.O. Soboyejo, Role of equine ordure in enhancing physical and mechanical properties of natural bioactive composites, Apple Academic Press, NY, 2018.
  51. R.K. Satankar, A. Kaurwar, S. Gupta, A. Plappally, Horse dung and soil based composites for construction of aesthetic shelves in rural homes of western Rajasthan, J. Environ. Nanotechnol., 6 (2017) 43–47.
  52. C. Manoharan, P. Sutharsan, S. Dhanapandian, Venkatachalapathy, Characteristics of some clay materials from Tamilnadu, India, and their possible ceramic uses, Cerâmica, 58 (2012) 412–418.
  53. L. Schultz, Quantitative interpretation of mineralogical composition from X-ray and chemical data for the Pierre Shale (No. 391-C), 1964.
  54. V. Kilikoglou, G. Vekinis, Y. Maniatis, P.M. Day, Mechanical performance of quartz‐tempered ceramics: part I, strength and toughness, Archaeometry, 40 (1998) 261–279.
  55. J.F. Wu, H. Cheng, X.H. Xu, T.F. Deng, Effect of sintering aids on the densification of andalusite ceramics, Adv. Mater. Res., 842 (2014) 78–82.
  56. S. Gupta, R. Satankar, A. Kaurwar, U. Aravind, M. Sharif, A. Plappally, Household production of ceramic water filters in Western Rajasthan, India, Int. J. Serv. Learn. Eng., 13 (2018) 53–66.
  57. S. Buys, V. Oakley, Conservation and Restoration of Ceramics, Routledge, Taylor & Francis Ltd, United Kingdom, 2014.
  58. A. Kaurwar, S. Gupta, R. Satankar, A. Plappally, Marble slurry as a potential ceramic water filtration material: comparative analysis with machined Fe powder and clay ceramics for effectiveness in As removal from water at point of use, Poster Presented at 3rd International Conference on Desalination Using Membrane Technology, Spain, April, 2017.
  59. M. Youmoue, R.T. Fongang, J.C. Sofack, E. Kamseu, U.C. Melo, I.K. Tonle, C. Leonelli, S. Rossignol, Design of ceramic filters using Clay/Sawdust composites: effect of pore network on the hydraulic permeability, Ceram. Int., 43 (2017) 4496–4507.
  60. C. Robertson, R. Beanland, S.A. Boden, A.L. Hector, R.J. Kashtiban, J. Sloan, D.C. Smith, A. Walcarius, Ordered mesoporous silica films with pores oriented perpendicular to a titanium nitride substrate, Phys. Chem. Chem. Phys., 17 (2015) 4763–4770.
  61. M. Wooten, Nanofiltration membranes from oriented mesoporous silica thin films, University of Kentucky, 2014, ACS Appl. Mater. Interfaces, (2016) 21806–21815.
  62. L. Griffiths, M.J. Heap, T. Xu, C.F. Chen, P.J. Baud, The influence of pore geometry and orientation on the strength and stiffness of porous rock, J. Struct. Geol., 96 (2017) 149–160.
  63. A.T. Servi, An experimental and analytical exploration of the effects of manufacturing parameters on ceramic pot filter performance, Massachusetts Institute of Technology, Cambridge, Massachusetts, 2013.
  64. W. Teughels, N. Van Assche, I. Sliepen, M. Quirynen, Effect of material characteristics and/or surface topography on biofilm development, Clin. Oral Implants Res.,17 (2006) 68–81.
  65. Y. Shao, B. Li, S.Y. Liang, Predictive modeling of surface roughness in grinding of ceramics, Mach. Sci. Technol., 19 (2015) 325–338.
  66. D. Jones, M. Ashby, Engineering Materials 2: An Introduction to Microstructures, Processing and Design, Butterworth-Heinemann, 2005.
  67. R.W. Davidge, A.G. Evans, The strength of ceramics, Mater. Sci. Eng., 6 (1970) 281–298.
  68. W. Soboyejo, Mechanical Properties of Engineered Materials, CRC Press, New York, 2002.
  69. I. Yakub, Micro- and Nano-porous Adsorptive Materials for Removal of Contaminants from Water at Point-of-use, Ph.D Thesis, Princeton University, Princeton, New Jersey, 2012.
  70. V.G. Lee, T.H. Yeh, Sintering effects on the development of mechanical properties of fired clay ceramics, Mater. Sci. Eng., 485 (2008) 5–13.
  71. S. Freiman, Fracture Mechanics for Ceramics, Rocks, and Concrete: A Symposium, J. ASTM Int., 745 (1981) 237–256.