References

  1. H. Zollinger, Color Chemistry: Syntheses, Properties, and Applications of Organic Dyes and Pigments, John Wiley & Sons, Weinheim, Germany, 2003.
  2. K. Kümmerer, The presence of pharmaceuticals in the environment due to human use–present knowledge and future challenges, J. Environ. Manage., 90 (2009) 2354–2366.
  3. U. Baig, M.K. Uddin, M.A. Gondal, Removal of hazardous azo dye from water using synthetic nano adsorbent: facile synthesis, characterization, adsorption, regeneration and design of experiments, Colloids Surf., A, 584 (2020) 124031, doi: 10.1016/j. colsurfa.2019.124031.
  4. H.S. Rai, M.S. Bhattacharyya, J. Singh, T.K. Bansal, P. Vats, U.C. Banerjee, Removal of dyes from the effluent of textile and dyestuff manufacturing industry: a review of emerging techniques with reference to biological treatment, Crit. Rev. Env. Sci. Technol., 35 (2005) 219–238.
  5. N.H. Torres, B.S. Souza, L.F.R. Ferreira, A.S. Lima, G.N. dos Santos, E.B. Cavalcanti, Real textile effluents treatment using coagulation/flocculation followed by electrochemical oxidation process and ecotoxicological assessment, Chemosphere, 236 (2019) 124309, doi: 10.1016/j.chemosphere.2019.07.040.
  6. Y.A. Oktem, B. Yuzer, M.I. Aydin, H.E. Okten, S. Meric, H. Selcuk, Chloride or sulfate? Consequences for ozonation of textile wastewater, J. Environ. Manage., 247 (2019) 749–755.
  7. E. Gregušková, K. Mičieta, Phytoindication of the ecogenotoxic effects of vehicle emissions using pollen abortion test with native flora, Pol. J. Environ. Stud., 22 (2013) 1069–1076.
  8. K.B. Daij, S. Bellebia, Z. Bengharez, Comparative experimental study on the COD removal in aqueous solution of pesticides by the electrocoagulation process using monopolar iron electrodes, Chem. Int., 3 (2017) 420–427.
  9. M.A. Jamal, M. Muneer, M. Iqbal, Photo-degradation of monoazo dye blue 13 using advanced oxidation process, Chem. Int., 1 (2015) 12–16.
  10. S. Sugashini, T. Gomathi, R.A. Devi, P.N. Sudha, K. Rambabu, F. Banat, Nanochitosan/carboxymethyl cellulose/TiO2 biocomposite for visible-light-induced photocatalytic degradation of Crystal violet dye, Environ. Res., 204 (2022) 112047, doi: 10.1016/j.envres.2021.112047.
  11. A. Chham, E.H. Khouya, M. Oumam, A. Abourriche, S. Gmouh, M. Larzek, S. Mansouri, N. Elhammoudi, N. Hanafi, H. Hannache, The use of insoluble mater of Moroccan oil shale for removal of dyes from aqueous solution, Chem. Int., 4 (2018) 67–77.
  12. S. Benkhaya, S. M’rabet, A. El Harfi, A review on classifications, recent synthesis and applications of textile dyes, Inorg. Chem. Commun., 115 (2020) 107891, doi: 10.1016/j.inoche.2020.107891.
  13. M. Breida, S.A. Younssi, A. Bouazizi, B. Achiou, M. Ouammou, M. El Rhazi, Nitrate removal from aqueous solutions by γ-Al2O3 ultrafiltration membranes, Heliyon, 4 (2018) e00498, doi: 10.1016/j.heliyon.2017.e00498.
  14. S. Benkhaya, B. Achiou, M. Ouammou, J. Bennazha, S.A. Younssi, S. M’rabet, A. El Harfia, Preparation
    of low-cost composite membrane made of polysulfone/polyetherimide ultrafiltration layer and ceramic pozzolan support for dyes removal, Mater. Today Commun., 19 (2019) 212–219.
  15. C.F. Couto, L.C. Lange, M.C.S. Amaral, A critical review on membrane separation processes applied to remove pharmaceutically active compounds from water and wastewater, J. Water Process Eng., 26 (2018) 156–175.
  16. R. Castro-Muñoz, G. Boczkaj, E. Gontarek, A. Cassano, V. Fíla, Membrane technologies assisting plant-based and agro-food by-products processing: a comprehensive review, Trends Food Sci. Technol., 95 (2020) 219–232.
  17. X. Li, H. Shan, W. Zhang, B. Li, 3D printed robust superhydrophilic and underwater superoleophobic composite membrane for high efficient oil/water separation, Sep. Purif. Technol., 237 (2020) 116324, doi: 10.1016/j.seppur.2019. 116324.
  18. H. Saleem, L. Trabzon, A. Kilic, S.J. Zaidi, Recent advances in nanofibrous membranes: production and applications in water treatment and desalination, Desalination, 478 (2020) 114178, doi: 10.1016/j.desal.2019.114178.
  19. C.A. Scholes, Hydrogen cyanide recovery by membrane gas separation, Chem. Eng. J., 386 (2020) 124049, doi: 10.1016/j.cej.2020.124049.
  20. P.A. Sosa-Fernandez, J.W. Post, F.A.M. Leermakers, H.H.M. Rijnaarts, H. Bruning, Removal of divalent ions from viscous polymer-flooding produced water and seawater via electrodialysis, J. Membr. Sci., 589 (2019) 117251, doi: 10.1016/j.memsci.2019.117251.
  21. N. Oussama, H. Bouabdesselam, N. Ghaffour, L. Abdelkader, Characterization of seawater reverse osmosis fouled membranes from large scale commercial desalination plant, Chem. Int., 5 (2019) 158–167.
  22. E. Filloux, B. Teychene, A. Tazi-Pain, J.-P. Croue, Ultrafiltration of biologically treated domestic wastewater: how membrane properties influence performance, Sep. Purif. Technol., 134 (2014) 178–186.
  23. S.-H. Zhi, L.-S. Wan, Z.-K. Xu, Poly(vinylidene fluoride)/poly(acrylic acid)/calcium carbonate composite membranes via mineralization, J. Membr. Sci., 454 (2014) 144–154.
  24. Y. Ma, F. Shi, J. Ma, M. Wu, J. Zhang, C. Gao, Effect of PEG additive on the morphology and performance of polysulfone ultrafiltration membranes, Desalination, 272 (2011) 51–58.
  25. K. Nouzaki, M. Nagata, J. Arai, Y. Idemoto, N. Koura, H. Yanagishita, H. Negishi, D. Kitamoto, T. Ikegami, K. Haraya, Preparation of polyacrylonitrile ultrafiltration membranes for wastewater treatment, Desalination, 144 (2002) 53–59.
  26. R. Krishnamoorthy, V. Sagadevan, Polyethylene glycol and iron oxide nanoparticles blended polyethersulfone ultrafiltration membrane for enhanced performance in dye removal studies, e-Polymers, 15 (2015) 151–159.
  27. A.L. Ahmad, A.A. Abdulkarim, B.S. Ooi, S. Ismail, Recent development in additives modifications of polyethersulfone membrane for flux enhancement, Chem. Eng. J., 223 (2013) 246–267.
  28. D.M. Al-Ani, F.H. Al-Ani, Q.F. Alsalhy, S.S. Ibrahim, Preparation and characterization of ultrafiltration membranes from PPSUPES polymer blend for dye removal, Chem. Eng. Commun., 208 (2021) 41–59.
  29. M.H. Al-Furaiji, K.R. Kalash, M.A. Kadhom, Q.F. Alsalhy, Evaluation of polyethersulfone microfiltration membranes embedded with MCM-41 and SBA-15 particles for turbidity removal, Desal. Water Treat., 215 (2021) 50–59.
  30. K. Kalash, M. Kadhom, M. Al-Furaiji, Thin film nanocomposite membranes filled with MCM-41 and SBA-15 nanoparticles for brackish water desalination via reverse osmosis, Environ. Technol. Innovation, 20 (2020) 101101, doi: 10.1016/j.eti.2020.101101.
  31. S.S. Hussein, S.S. Ibrahim, M.A. Toma, Q.F. Alsalhy, E. Drioli, Novel chemical modification of polyvinyl chloride membrane by free radical graft copolymerization for direct contact membrane distillation (DCMD) application, J. Membr. Sci., 611 (2020) 118266, doi: 10.1016/j.memsci.2020.118266.
  32. S. Zinadini, A.A. Zinatizadeh, M. Rahimi, V. Vatanpour, H. Zangeneh, Preparation of a novel antifouling mixed matrix PES membrane by embedding graphene oxide nanoplates, J. Membr. Sci., 453 (2014) 292–301.
  33. M. Abedi, M. Sadeghi, M.P. Chenar, Improving antifouling performance of PAN hollow fiber membrane using surface modification method, J. Taiwan Inst. Chem. Eng., 55 (2015) 42–48.
  34. M. Abedi, M.P. Chenar, M. Sadeghi, Surface modification of PAN hollow fiber membrane by chemical reaction, Fibers Polym., 16 (2015) 788–793.
  35. M.R. Esfahani, J.L. Tyler, H.A. Stretz, M.J.M. Wells, Effects of a dual nanofiller, nano-TiO2 and MWCNT, for polysulfone-based nanocomposite membranes for water purification, Desalination, 372 (2015) 47–56.
  36. K. Rambabu, S. Gokul, A.S. Russel, S. Akella, P. Babu, F. Banat, Lithium perchlorate modified nanoporous polyethersulfone membranes for improved dye rejection, Desal. Water Treat., 122 (2018) 146–157.
  37. C. Evangeline, V. Pragasam, K. Rambabu, S. Velu, P. Monash, G. Arthanareeswaran, F. Banat, Iron oxide modified polyethersulfone/cellulose acetate blend membrane for enhanced defluoridation application, Desal. Water Treat., 156 (2019) 177–188.
  38. N. Viart, D. Niznansky, J.L. Rehspringer, Structural evolution of a formamide modified sol—spectroscopic study, J. Sol-Gel Sci. Technol., 8 (1997) 183–187.
  39. X. Ma, N.-H. Lee, H.-J. Oh, J.-S. Hwang, S.-J. Kim, Preparation and characterization of silica/polyamide-imide nanocomposite thin films, Nanoscale Res. Lett., 5 (2010) 1846–1851.
  40. Z. Zhenxin, T. Matsuura, Discussions on the formation mechanism of surface pores in reverse osmosis, ultrafiltration, and microfiltration membranes prepared by phase inversion process, J. Colloid Interface Sci., 147 (1991) 307–315.
  41. Q.-Z. Zheng, P. Wang, Y.-N. Yang, Rheological and thermodynamic variation in polysulfone solution by PEG introduction and its effect on kinetics of membrane formation via phase-inversion process, J. Membr. Sci., 279 (2006) 230–237.
  42. J.-F. Blanco, J. Sublet, Q.T. Nguyen, P. Schaetzel, Formation and morphology studies of different
    polysulfones-based membranes made by wet phase inversion process, J. Membr. Sci., 283 (2006) 27–37.
  43. M.-J. Han, D. Bhattacharyya, Changes in morphology and transport characteristics of polysulfone membranes prepared by different demixing conditions, J. Membr. Sci., 98 (1995) 191–200.
  44. Z. Wang, J. Ma, Q. Liu, Pure sponge-like membranes bearing both high water permeability and high retention capacity, Desalination, 278 (2011) 141–149.
  45. V.P. Khare, A.R. Greenberg, J. Zartman, W.B. Krantz, P. Todd, Macrovoid growth during polymer membrane casting, Desalination, 145 (2002) 17–23.
  46. M. Pakizeh, S.A.A. Mansoori, M. Pourafshari Chenar, M. Namvar-Mahboub, Modification of PSf membrane nanostructure using different fabrication parameters and investigation of the CO2 separation properties of PDMS-coated PSf composite membranes, Braz. J. Chem. Eng., 30 (2013) 345–354.
  47. S.S. Madaeni, A. Rahimpour, Effect of type of solvent and non‐solvents on morphology and performance of polysulfone and polyethersulfone ultrafiltration membranes for milk concentration, Polym. Adv. Technol., 16 (2005) 717–724.
  48. C. Barth, M.C. Goncalves, A.T.N. Pires, J. Roeder, B.A. Wolf, Asymmetric polysulfone and polyethersulfone membranes: effects of thermodynamic conditions during formation on their performance, J. Membr. Sci., 169 (2000) 287–299.
  49. C. Barth, M.C. Goncalves, A.T.N. Pires, J. Roeder, B.A. Wolf, Fine structure of poly(vinylidene fluoride) membranes prepared by phase inversion from a water/N-methyl-2-pyrollidone/poly(vinylidene fluoride) system, J. Polym. Sci., Part B: Polym. Phys., 42 (2004) 830–842.
  50. M.G. Buonomenna, P. Macchi, M. Davoli, E. Drioli, Poly(vinylidene fluoride) membranes by phase inversion: the role the casting and coagulation conditions play in their morphology, crystalline structure and properties, Eur. Polym. J., 43 (2007) 1557–1572.
  51. Z. Zhang, Q. An, Y. Ji, J. Qian, C. Gao, Effect of zero shear viscosity of the casting solution on the morphology and permeability of polysulfone membrane prepared via the phaseinversion process, Desalination, 260 (2010) 43–50.
  52. S. Darvishmanesh, J.C. Jansen, F. Tasselli, E. Tocci, P. Luis, J. Degrève, E. Drioli, B. Van der Bruggen, Novel polyphenylsulfone membrane for potential use in solvent nanofiltration, J. Membr. Sci., 379 (2011) 60–68.
  53. S. Rajesh, P. Maheswari, S. Senthilkumar, A. Jayalakshmi, D. Mohan, Preparation and characterisation of poly (amideimide) incorporated cellulose acetate membranes for polymer enhanced ultrafiltration of metal ions, Chem. Eng. J., 171 (2011) 33–44.
  54. J. Hong, Y. He, Polyvinylidene fluoride ultrafiltration membrane blended with nano-ZnO particle for photo-catalysis self-cleaning, Desalination, 332 (2014) 67–75.
  55. X. Cao, J. Ma, X. Shi, Z. Ren, Effect of TiO2 nanoparticle size on the performance of PVDF membrane, Appl. Surf. Sci., 253 (2006) 2003–2010.
  56. A. Nabe, E. Staude, G. Belfort, Surface modification of polysulfone ultrafiltration membranes and fouling by BSA solutions, J. Membr. Sci., 133 (1997) 57–72.
  57. A. Idris, N.M. Zain, M.Y. Noordin, Synthesis, characterization and performance of asymmetric polyethersulfone (PES) ultrafiltration membranes with polyethylene glycol of different molecular weights as additives, Desalination, 207 (2007) 324–339.
  58. J. Lin, C.Y. Tang, C. Huang, Y.P. Tang, W. Ye, J. Li, J. Shen, R. Van den Broeck, J. Van Impe, A. Volodin,
    C. Van Haesendonck, A. Sotto, P. Luis, B. Van der Bruggen, A comprehensive physico-chemical characterization of superhydrophilic loose nanofiltration membranes, J. Membr. Sci., 501 (2016) 1–14.
  59. E.M. Vrijenhoek, S. Hong, M. Elimelech, Influence of membrane surface properties on initial rate of colloidal fouling of reverse osmosis and nanofiltration membranes, J. Membr. Sci., 188 (2001) 115–128.
  60. G. Nechifor, S.I. Voicu, A.C. Nechifor, S. Garea, Nanostructured hybrid membrane polysulfone-carbon nanotubes for hemodialysis, Desalination, 241 (2009) 342–348.
  61. N.A.A. Hamid, A.F. Ismail, T. Matsuura, A.W. Zularisam, W.J. Lau, E. Yuliwati, M.S. Abdullah, Morphological and separation performance study of polysulfone/titanium dioxide (PSF/TiO2) ultrafiltration membranes for humic acid removal, Desalination, 273 (2011) 85–92.
  62. S. Majeed, D. Fierro, K. Buhr, J. Wind, B. Du, A. Boschetti-de-Fierro, V. Abetz, Multi-walled carbon nanotubes (MWCNTs) mixed polyacrylonitrile (PAN) ultrafiltration membranes, J. Membr. Sci., 403 (2012) 101–109.
  63. M.K. Purkait, S. DasGupta, S. De, Removal of dye from wastewater using micellar-enhanced ultrafiltration and recovery of surfactant, Sep. Purif. Technol., 37 (2004) 81–92.
  64. S. Zinadini, A.A. Zinatizadeh, M. Rahimi, V. Vatanpour, H. Zangeneh, M. Beygzadeh, Novel high flux antifouling nanofiltration membranes for dye removal containing carboxymethyl chitosan coated Fe3O4 nanoparticles, Desalination, 349 (2014) 145–154.
  65. M. Mahmoudian M.G. Kochameshki, The performance of polyethersulfone nanocomposite membrane in the removal of industrial dyes, Polymer (Guildf), 224 (2021) 123693, doi: 10.1016/j.polymer.2021.123693.
  66. I. Petrinić, N.P.R. Andersen, S. Šostar-Turk, A.M. Le Marechal, The removal of reactive dye printing compounds using nanofiltration, Dyes Pigm., 74 (2007) 512–518.
  67. A. Akbari, M. Hamadanian, V. Jabbari, A.Y. Lehi, M. Bojaran, Influence of PVDF concentration on the morphology, surface roughness, crystalline structure, and filtration separation properties of semicrystalline phase inversion polymeric membranes, Desal. Water Treat., 46 (2012) 96–106.
  68. M.R.S. Kebria, M. Jahanshahi, A. Rahimpour, SiO2 modified polyethyleneimine-based nanofiltration membranes for dye removal from aqueous and organic solutions, Desalination, 367 (2015) 255–264.
  69. T. Tavangar, M. Karimi, M. Rezakazemi, K.R. Reddy, T.M. Aminabhavi, Textile waste, dyes/inorganic salts separation of cerium oxide-loaded loose nanofiltration polyethersulfone membranes, Chem. Eng. J., 385 (2020) 123787, doi: 10.1016/j.cej.2019.123787.
  70. M.Y. Ghadhban, H. Shaker Majdi, K.T. Rashid, Q.F. Alsalhy, D. Shanthana Lakshmi, I.K. Salih, A. Figoli, Removal of dye from a leather tanning factory by flat-sheet blend ultrafiltration (UF) membrane, Membranes (Basel), 10 (2020) 47, doi: 10.3390/membranes10030047.
  71. R.J. Kadhim, F.H. Al-Ani, M. Al-Shaeli, Q.F. Alsalhy, A. Figoli, Removal of dyes using graphene oxide (GO) mixed matrix membranes, Membranes (Basel), 10 (2020) 366, doi: 10.3390/membranes10120366.
  72. D.D. Al-Araji, F.H. Al-Ani, Q.F. Alsalhy, Modification of polyethersulfone membranes by polyethyleneimine (PEI) grafted silica nanoparticles and their application for textile wastewater treatment, Environ. Technol., (2022) 1–17, doi: 10.1080/09593330.2022.2049890.
  73. M. Abdul-Majeed, A.N. Ahmed, M. Al-Furaiji, I. Ghazi, Effect of adding arabic gum and zinc oxide nanoparticles to MBR membranes supported by carbon nanotubes for ultrafiltration process of dairy wastewater, Pollution, 8 (2022) 1233–1249.
  74. M.K. Paidi, V. Polisetti, K. Damarla, P.S. Singh, S.K. Mandal, P. Ray, 3D natural mesoporous biosilica-embedded polysulfone made ultrafiltration membranes for application in separation technology, Polymers (Basel), 14 (2022) 1750, doi: 10.3390/polym14091750.