References

  1. S. Judd, C. Judd, The MBR Book, Butterworth-Heinemann, Oxford, 2011.
  2. S.S. Madaeni, N. Ghaemi, H. Rajabi, 1 – Advances in Polymeric Membranes for Water Treatment, in Advances in Membrane Technologies for Water Treatment: Materials, Processes and Applications, Woodhead Publishing Series in Energy, Cambridge, 2015, pp 3–41.
  3. A.E. Childress, P. Le-Clech, J.L. Daugherty, C. Chen, G.L. Leslie, Mechanical analysis of hollow fiber membrane integrity in water reuse applications, Desalination, 180 (2005) 5–14.
  4. K. Wang, A.A. Abdalla, M.A. Khaleel, N. Hilal, M.K. Khraisheh, Mechanical properties of water desalination and wastewater treatment membranes, Desalination, 401 (2017) 190–205.
  5. D. Hou, J. Wang, X. Sun, Z. Ji, Z. Luan, Preparation and properties of PVDF composite hollow fiber membranes for desalination through direct contact membrane distillation, J. Membr. Sci., 405 (2012) 185–200.
  6. J. Hong, Y. He, Effects of nano sized zinc oxide on the performance of PVDF microfiltration membranes, Desalination, 302 (2012) 71–79.
  7. R.P. Chartoff, J.D. Menczel, S.H. Dillman, Dynamic Mechanical Analysis (DMA), Thermal Analysis of Polymers, John Wiley & Sons, Boca Raton, FL, USA, 2008.
  8. T.S. Chung, J.J. Qin, J. Gu, Effect of shear rate within the spinneret on morphology, separation performance and mechanical properties of ultrafiltration polyethersulfone hollow fiber membranes, Chem. Eng. Sci., 55 (2000) 1077–1091.
  9. K. Emori, T. Miura, H. Kishida, A. Yonezu, Creep deformation behavior of polymer materials with a 3D random pore structure: Experimental investigation and FEM modeling, Polym. Test., 80 (2019) 106097, doi: 10.1016/j.polymertesting.2019.106097.
  10. K.H. Tng, Mechanical Failure in Potable Reuse Plants: Component and System Reliability Considerations, Ph.D. Thesis, University of New South Wales, Sydney, 2018.
  11. ANSYS Mechanical APDL Structural Analysis Guide, ANSYS Inc., Canonsburg, PA, 2018.
  12. ANSYS Mechanical APDL Basic Analysis Guide, ANSYS Inc., Canonsburg, PA, 2018.
  13. ANSYS Mechanical APDL Material Reference, ANSYS Inc., Canonsburg, PA, 2018.
  14. MATLAB, Curve Fitting Toolbox, Mathworks, 2022. Available at https://uk.mathworks.com/products/curvefitting.html (Accessed 25 03 2022).
  15. Solef PVDF Design & Processing Guide, Solvay.
  16. R. Singh, N.P. Hankins, Chapter 2 – Introduction to Membrane Processes for Water Treatment, N. Hankins, R. Singh, Eds., Emerging Membrane Technology for Sustainable Water Treatment, Elsevier, Amsterdam, 2016, pp 14–52.
  17. M.D. Kennedy, J. Kamanyi, S.G. Salinas Rodriguez, N.H. Lee, J.C. Schippers, G. Amy, Water Treatment by Microfiltration and Ultrafiltration, in Advanced Membrane Technology and Applications, John Wiley & Sons, New Jersey, 2008, pp 131–170.
  18. J. Schijve, Fatigue of Structures and Materials, Springer, New Jersey, USA, 2009.