References
- O. Kazak, A. Tor, I. Akin, G. Arslan, Preparation and
characterization of novel polysulfone-red mud composite
capsules for the removal of fluoride from aqueous solutions,
RSC Adv., 6 (2016) 86673–86681.
- P. Miretzky, A.F. Cirelli, Fluoride removal from water by
chitosan derivatives and composites: a review, J. Fluorine
Chem., 132 (2011) 231–240.
- Meenakshi, R.C. Maheshwari, Fluoride in drinking water and
its removal, J. Hazard. Mater., 137 (2006) 456–463.
- M. Amini, K. Mueller, K.C. Abbaspour, T. Rosenberg, M.
Afyuni, K.N. Moller, M. Sarr, C.A. Johnson, Statistical modeling
of global geogenic fluoride contamination in ground waters,
Environ. Sci. Technol., 42 (2008) 3662–3668.
- S. Bibi, M.A. Kamran, J. Sultana, A. Faroo, Occurrence and
methods to remove arsenic and fluoride contamination in
water, Environ. Chem. Lett., 15 (2017) 125–149.
- WHO Guidelines for Drinking-Water Quality [Electronic
Resource]: Incorporating First Addendum, WHO, Geneva,
2006, pp. 375–377.
- C.S. Sundaram, N. Viswanathan, S. Meenakshi, Uptake of
fluoride by nano-hydroxyapatite/chitosan, a bioinorganic
composite, Bioresour. Technol., 99 (2008) 8226–8230.
- A. Bhatnagar, E. Kumar, M. Sillanpaa, Fluoride removal from
water by adsorption—a review, Chem. Eng. J., 171 (2011)
811–840.
- K. Pandi, N. Viswanathan, In situ precipitation of nanohydroxyapatitie
in gelatin polymatrix towards specific fluoride
sorption, Int. J. Biol. Macromol., 74 (2015) 351–359.
- R. Srinivasan, Advances in application of natural clay and its
composites in removal of biological, organic, and inorganic
contaminants from drinking water, Adv. Mater. Sci. Eng., 2011
(2011) 1–17, doi: 1155/2011/872531.
- N. Rajamohan, J. Al-Sinani, Removal of boron using clay-effect
of process parameters, kinetic and isotherm studies, J. Eng. Sci.
Technol., 3 (2016) 311–326.
- K.G. Bhattacharya, S. Sen Gupta, Influence of acid activation on
adsorption of Ni(II) and Cu(II) on kaolinite and montmorillonite:
kinetic and thermodynamic study, Chem. Eng. J., 136 (2008)
1–13.
- M. Auta, B.H. Hameed, Modified mesoporous clay adsorbent
for adsorption isotherm and kinetics of methylene blue, Chem.
Eng. J., 198–199 (2012) 219–227.
- P. Devi, A.K. Saroha, Risk analysis of pyrolyzed biochar
made from paper mill effluent treatment plant sludge for
bioavailability and eco-toxicity of heavy metals, Bioresour.
Technol., 162 (2014) 308–315.
- APHA, Standard Methods for the Examination of Water and
Waste Water, 21st ed., American Public Health Association,
Washington, D.C., USA, 2005.
- Y.S. Ho, G. McKay, Pseudo-second order model for sorption
processes, Process Biochem., 34 (1999) 451–465.
- R. Jayakumar, M. Rajasimman, C. Karthikeyan, Sorption of
hexavalent chromium from aqueous solution using marine
green algae Halimeda gracilis: optimization, equilibrium, kinetic,
thermodynamic and desorption studies, J. Environ. Chem.
Eng., 2 (2014) 1261–1274.
- S. Ravulapalli, R. Kunta, Defluoridation studies using active
carbon derived from the barks of Ficus racemosa plant, J. Fluorine
Chem., 193 (2017) 58–66.
- N. Viswanathan, S. Meenakshi, Enriched fluoride sorption
using alumina/chitosan composite, J. Hazard. Mater., 178 (2010)
226–232.
- D. Thakre, S. Rayalu, R. Kawade, S. Meshram, J. Subrt, N.
Labhsetwar, Magnesium incorporated bentonite clay for
defluoridation of drinking water, J. Hazard. Mater., 180 (2010)
122–130.