References

  1. E. Drioli, A. Criscuoli, E. Curcio, Membrane Contactors: Fundamentals, Applications and Potentialities, Elsevier, 2006.
  2. M.L. Méndez, A.I. Romero, V.B. Rajal, E.F. Castro, J.I. Calvo, L. Palacio, A. Hernández, Properties of polyethersulfone ultrafiltration membranes modified with polyethylene glycols, Polym. Eng. Sci., 54 (2014) 1211–1221.
  3. C.H. Loh, R. Wang, Effects of additives and coagulant temperature on fabrication of high performance PVDF/pluronic F127 blend hollow fiber membranes via nonsolvent induced phase separation, Chinese J. Chem. Eng., 20 (2012) 71–79.
  4. C. Feng, R. Wang, B. Shi, G. Li, Y. Wu, Factors affecting pore structure and performance of poly(vinylidene fluoride-co-hexafluoro propylene) asymmetric porous membrane, J. Membr. Sci., 277 (2006) 55–64.
  5. Z.-L. Xu, F. Alsalhy Qusay, Polyethersulfone (PES) hollow fiber ultrafiltration membranes prepared by PES/non-solvent/NMP solution, J. Membr. Sci., 233 (2004) 101–111.
  6. J. Xie, Q. Wei, B. Su, B. Qian, Q. Ling, C. Zhao, Preparation and characterization of sandwich-structure polyethersulfone membrane with pH sensitivity, Desal. Water Treat., 8 (2009) 163–170.
  7. H. Susanto, M. Ulbricht, Characteristics, performance and stability of polyethersulfone ultrafiltration membranes prepared by phase separation method using different macromolecular additives, J. Membr. Sci., 327 (2009) 125–135.
  8. M. Sivakumar, D.R. Mohan, R. Rangarajan, Studies on cellulose acetate-polysulfone ultrafiltration membranes: II. Effect of additive concentration, J. Membr. Sci., 268 (2006) 208–219.
  9. S.A. Al Malek, M.N. Abu Seman, D. Johnson, N. Hilal, Formation and characterization of polyethersulfone membranes using different concentrations of polyvinylpyrrolidone, Desalination, 288 (2012) 31–39.
  10. T. Miyano, T. Matsuura, S. Sourirajan, Effect of polyvinylpyrrolidone additive on the pore size and the pore size distribution of polyethersulfone (victrex) membranes, Chem. Eng. Commun., 119 (1993) 23–39.
  11. A. Idris, N. Mat Zain, M.Y. Noordin, Synthesis, characterization and performance of asymmetric polyethersulfone (PES) ultrafiltration membranes with polyethylene glycol of different molecular weights as additives, Desalination, 207 (2007) 324–339.
  12. H. Susanto, N. Stahra, M. Ulbricht, High performance polyethersulfone microfiltration membranes having high flux and stable hydrophilic property, J. Membr. Sci., 342 (2009) 153–164.
  13. J.H. Lee, Y.M. Ju, D. M. Kim, Platelet adhesion onto segmented polyurethane film surfaces modified by addition and crosslinking of PEO-containing block copolymers, Biomaterials, 21 (2000) 683–691.
  14. Y.-q. Wang, T. Wang, Y.-l. Su, F.-b. Peng, H. Wu, Z. Jiang, Remarkable reduction of irreversible fouling and improvement of the permeation properties of poly(ether sulfone) ultrafiltration membranes by blending with pluronic F127, Langmuir, 21 (2005) 11856–11862.
  15. K. Gao, X. Hu, C. Dai, T. Yi, Crystal structures of electrospun PVDF membranes and its separator application for rechargeable lithium metal cells, Mater. Sci. Eng. B, 131 (2006) 100–105.
  16. M. Amirilargani, E. Saljoughi, T. Mohammadi, M.R. Moghbeli, Effects of coagulation bath temperature and polyvinylpyrrolidone content on flat sheet asymmetric polyethersulfone membranes, Polym. Eng. Sci., 50 (2010) 885–893.
  17. I. Cabasso, E. Klein, J.K. Smith, Polysulfone hollow fibers. I. Spinning and properties, J. Appl. Polym. Sci., 20 (1976) 2377–2394.
  18. S.C.A. Cuperus F.P., Characterization of UF membranes: Membrane characteristics and characterization techniques, Adv. Colloid Interface Sci., 34 (1991) 135–173.
  19. W. Partlow, The Nature of Synthetic Membranes, Chemical Engineering, 2016, 1–3.
  20. K.A. Gebru, C. Das, Effects of solubility parameter differences among PEG, PVP and CA on the preparation of ultrafiltration membranes: Impacts of solvents and additives on morphology, permeability and fouling performances, Chinese J. Chem. Eng., 2017.
  21. K. Khanafer, A. Duprey, M. Schlicht, R. Berguer, Effects of strain rate, mixing ratio, and stress–strain definition on the mechanical behavior of the polydimethylsiloxane (PDMS) material as related to its biological applications, Biomed. Microdevices, 11 (2009) 503–508.
  22. C.H. Loh, R. Wang, L. Shi, A.G. Fane, Fabrication of high performance polyethersulfone UF hollow fiber membranes using amphiphilic Pluronic block copolymers as pore-forming additives, J. Membr. Sci., 380 (2011) 114–123.
  23. A. Pagidi, R. Saranya, G. Arthanareeswaran, A.F. Ismail, T. Matsuura, Enhanced oil–water separation using polysulfone membranes modified with polymeric additives, Desalination, 344 (2014) 280–288.
  24. S.B. Teli, A. Benamor, M. Nasser, A. Hawari, S.J. Zaidi, M. Ba-abbad, A.-W. Mohammad, Effects of amphiphilic pluronic F127 on the performance of PS/SPEEK blend ultrafiltration membrane: Characterization and antifouling study, J. Water Process Eng., 18 (2017) 176–184.
  25. S.H. Yoo, J.H. Kim, J.Y. Jho, J. Won, Y.S. Kang, Influence of the addition of PVP on the morphology of asymmetric polyimide phase inversion membranes: effect of PVP molecular weight, J. Membr. Sci., 236 (2004) 203–207.
  26. B. Chakrabarty, A.K. Ghoshal, M.K. Purkait, Preparation, characterization and performance studies of polysulfone membranes using PVP as an additive, J. Membr. Sci., 315 (2008) 36–47.
  27. C. Lv, Y. Su, Y. Wang, X. Ma, Q. Sun, Z. Jiang, Enhanced permeation performance of cellulose acetate ultrafiltration membrane by incorporation of Pluronic F127, J. Membr. Sci., 294 (2007) 68–74.
  28. A. Venault, Y. Chang, Surface hydrophilicity and morphology control of anti-biofouling polysulfone membranes via vapor-induced phase separation processing, J. Nanosci. Nanotechnol., 13 (2013) 2656–2666.
  29. R. Raslan, A. Mohammad, Polysulfone/pluronic F127 blend ultrafiltration membranes: preparation and characterizations, J. Appl. Sci., 10 (2010) 2628–2632.
  30. W. Zhao, Y. Su, C. Li, Q. Shi, X. Ning, Z. Jiang, Fabrication of antifouling polyethersulfone ultrafiltration membranes using Pluronic F127 as both surface modifier and pore-forming agent, J. Membr. Sci., 318 (2008) 405–412.
  31. Y.-Q. Wang, Y.-L. Su, X.-L. Ma, Q. Sun, Z.-Y. Jiang, Pluronic polymers and polyethersulfone blend membranes with improved fouling-resistant ability and ultrafiltration performance, J. Membr. Sci., 283 (2006) 440–447.
  32. F. Meng, S.-R. Chae, A. Drews, M. Kraume, H.-S. Shin, F. Yang, Recent advances in membrane bioreactors (MBRs): Membrane fouling and membrane material, Water Res., 43 (2009) 1489–1512.
  33. Y. Yang, H. Zhang, P. Wang, Q. Zheng, J. Li, The influence of nano-sized TiO2 fillers on the morphologies and properties of PSF UF membrane, J. Membr. Sci., 288 (2007) 231–238.