References

  1. S.R. Qasim, E.M. Motley, G. Zhu, Water Works Engineering: Planning, design, and operation, Prentice Hall, (2000), ISBN-0-13-150211-5.
  2. P.K. Swamee, A. Tyagi, Design of class-I sedimentation tanks, J. Env. Eng., 122 (1996) 71–73.
  3. A. Tamayol, B. Firoozabadi, G. Ahmadi, Effects of inlet position and baffle configuration on hydraulic performance of primary settling tanks, J. Hydraul. Eng., 134 (2008) 1004–1009.
  4. D.G. Stevenson, Water Treatment Unit Process, Imperial College Press, (1997).
  5. A. Tamayol1, B. Firoozabadi1, G. Ahmadi, Determination of settling tanks performance using an Eulerian-Lagrangian method, J. Appl. Fluid Mech., 1 (2008) 43–54.
  6. J. Oca, I. Masaló, L. Reig, Comparative analysis of flow patterns in aquaculture rectangular tanks with different water inlet characteristics, Aquacult. Eng., 31 (2004) 221–236.
  7. A.I. Stamou, On the prediction of flow and mixing in settling tanks using a curvature-modified k–ε model, Appl. Math. Model., 15 (1991) 351–358.
  8. A.M. Razmi, B. Firoozabadi, G. Ahmadi, Experimental and numerical approach to enlargement of performance of primary settling tanks, J. Appl. Fluid Mech., 2 (2009) 1–12.
  9. M. Shahrokhi, F. Rostami, M.A.M. Said, S.R.S. Yazdi, S. Syafalni, The effect of number of baffles on the improvement efficiency of primary sedimentation tanks, Appl. Math. Model., 36 (2012) 3725–3735.
  10. P. Krebs, D. Vischer, W. Gujer, Inlet-structure design for final clarifiers, J. Environ. Eng., ASCE, 121 (1995) 558–564.
  11. A. Stamou, I. Katsiris, S. Georgiadis, S. Kanellopoulou, F. Tzoumerkas, D. Xenos, Improving the efficiency of existing water process tanks using water process tanks using flow through curves (FTCs) and mathematical models. Proc. 7th Conference on Environmental Science and Technology, 2001, pp. 838–845.
  12. M.A. Ashjari, B. Firoozabadi, Use of nonlinear k-ε in calculation of performance of settling tanks, Proc. 11th International Conference of Mechanical Engineering, (2003) 34–43.
  13. A. Tamayol, M. Nazari, B. Firoozabadi, A. Nabovati, Numerical modeling and study of effects of inlet position and height of inlet baffle on the performance of settling tanks, Fluid Dynamics Conf., Iran (In Farsi), (2005) 613–618.
  14. A.I. Stamou, E.W. Adams, Study of the hydraulic behavior of a model settling tank using flow through curves and flow patterns, SFB 210/E/36, University Karlsruhe, West Germany, (1988) 92.
  15. R.F. Wills, C. Davis, Flow pattern in a rectangular sewage sedimentation tank. In: 1st International Conference on Water Pollution Research, Westminster, London, UK, (1962) 335–385.
  16. A. Tamayol, B. Firoozabadi, Effects of turbulent models and baffle position on hydrodynamics of settling tanks, Scientia. Iranica. J., 13 (2006) 255–260.
  17. A. Tamayol, B. Firoozabadi, G. Ahmadi, Increasing performance of final settling tanks by using baffles, 7th International Conference on Hydroinformatics, HIC, 2006, Nice, France, 2006.
  18. E.W. Adams, W. Rodi, Modeling flow and mixing in sedimentation tanks. J. Hydraul. Eng. 116 (1990) 895–913.
  19. F.H. Ahmed, A. Kamel, S. Abdel Jawad, Experimental determination of the optimal location and contraction of sedimentation tank baffles, Water, Air Soil Pollut., 92 (1996) 251–271.
  20. D.L. Huggins, R.H. Piedrahita, T. Rumsey, Use of computational fluid dynamics (CFD) for aquaculture raceway design to increase settling effectiveness, Aquacult. Eng., 33 (2005) 167–180.
  21. A.M. Goula, M. Kostoglou, T.D. Karapantsios, A.I. Zouboulis, CFD methodology for the design of sedimentation tanks in potable water treatment Case study: The influence of a feed flow control baffle, Chem. Eng. J., 140 (2008) 110–121.
  22. D.R. Shamber, B.E. Larock, Numerical analysis of flow in sedimentation basins, J. Hydr. Div. ASCE, 107(HY5) (1981) 575–591.
  23. J.A. McCorquodale, E.M. Yuen, Z. Vitasovic, R. Samstag, Numerical simulation of unsteady conditions in clarifiers, Water Poll. Res. J. Can., 26 (1991) 201–222.
  24. J.A. McCorquodale, S. Zhou, Effects of hydraulic and solids loading on clarifier performance, J. Hydr. Res., 31 (1993) 461– 477.
  25. S. Zhou, J.A. McCorquodale, A.M. Godo, Short circuiting and density interface in primary clarifiers, J. Hydr. Eng., 120 (1994) 1060–1080.
  26. P. Krebs, D. Vischer, W. Gujer, Inlet-structure design for final clarifiers, J. Environ. Eng., 121 (1995) 558–564.
  27. A. Deininger, E. Holthausen, P.A. Wilderer, Velocity and solids distribution in circular secondary clarifiers: Full scale measurements and numerical modelling, Water Res., 32 (1998) 2951– 2958.
  28. E. Imam, J.A. McCorquodale, J.K. Bewtra, Numerical modeling of sedimentation tanks, J. Hydr. Eng., 109 (1983) 1740–1754.
  29. A.I. Stamou, E.A. Adams, W. Rodi, Numerical modelling of flow and settling in primary rectangular clarifiers, J. Hydr. Res., 27 (1989) 665–682.
  30. E.W., Adams, W. Rodi, Modelling flow and mixing in sedimentation tanks, J. Hydr. Eng., 116 (1990) 895–913.
  31. D.A. Lyn, A. Stamou, W. Rodi, Density currents and shear induced flocculation in sedimentation tanks, J. Hydr. Eng., 118 (1992) 849–867.
  32. P.H. Frey, Hydrodynamics fields and solid particle transport in a settling tank, J. Hydr. Res., 31 (1993) 763–776.
  33. M. Shahrokhi, F. Rostami, M.A.M. Said, S. Syafalni, Numerical modeling of baffle location effects on the flow pattern of primary sedimentation tanks, Appl. Math. Model., 37 (2013) 4486–4496.
  34. S.M. Sajjadi, M.S. Bejestan, M. Bina, Effect of baffle in irrigation settling basin with CFD. 3th national water resources water of Iran, Tabriz, (In Persian) (2005).
  35. A.A. Abbas, J. Kris, A.H. Ghawi, Performance improvement of water treatment plants In Iraq by CFD model, Al-Qadisiyah J. Eng. Sci., 3(1), (2010).
  36. T. Takamatsu, M. Nayto, Effects of flow conditions on the efficiency of a sedimentation vessel, Water Res., 1 (1967) 433–450.
  37. V.R. Stovin, A.J. Saul, Sedimentation in storage tank structures. Water Sci. Technol., 29 (1994) 363–372.
  38. A. Taebi-Harandi, E.D. Schroeder, Formation of density currents in secondary clarifier, Water Res., 34(4) (2000) 1225–1232.
  39. T.H. Yoon, S.O. Lee, Hydraulic behavior and removal efficiency of settling tanks, KSCE J. Civil Eng., 4 (2000), 53–57.
  40. B.E. Launder, D.B. Spalding, The numerical computation of turbulent flows. Comp. Methods Appl. Mech. Eng., 3 (1974) 269–289.
  41. P.R. López, A.G. Lavȋn, M.M.M. López, J.L.B.D.L. Heras, Flow models for rectangular sedimentation tanks, Chem. Eng. Process., 47 (2008) 1705–1716.
  42. R. Tarpagkou, A. Pantokratoras, CFD methodology for sedimentation tanks: The effect of secondary phase on fluid phase using DPM coupled calculations, Appl. Math. Model., 37 (2013) 3478–3494.
  43. H. Guo, S.J. Ki, S. Oh, Y.M. Kim, S. Wang, J.H. Kim, Numerical simulation of separation process for enhancing fine particle removal in tertiary sedimentation tank mounting adjustable baffle, Chem. Eng. Sci., 158 (2017) 21–29.
  44. D. Zhang, Optimize sedimentation tank and lab flocculation unit by CFD, Norwegian University of Life Sciences, (2014).
  45. R.A. Falconer, T.H.Y. Tebbutt, A theoretical and hydraulic model study of a chlorine contact tank, Water Engineering Group, Proc. Inst. Ciu. Eng., Part 2, 81 (1986) 255–276.