References

1. A.P.S. Yeo, A.W.K. Law, A.G. Fane, Factors affecting the performance of a submerged hollow fiber bundle, J. Membr. Sci., 280 (2006) 969–982.
2. C. Albasi, Y. Bessiere, S. Desclaux, J.C. Remigy, Filtration of biological sludge by immersed hollow-fiber membranes: influence of initial permeability choice of operating conditions, Desalination, 146 (2002) 427–431.
3. J. Busch, A. Cruse, W. Marquardt, Modeling submerged hollowfiber membrane filtration for wastewater treatment, J. Membr. Sci., 288 (2007) 94–111.
4. A.M. Wachinski, Membrane Processes for Water Reuse, McGraw Hill Companies, Inc., United States of America, 2013.
5. K.V. Peinemann, S.P. Nunes, Membranes for Water Treatment, Wiley-VCH Verlag GmbH & Co. KGaA, United Kingdom, 2010.
6. K.B. Lim, P.C. Wang, H. An, S.C.M. Yu, Computational studies for the design parameters of hollow fibre membrane modules, J. Membr. Sci., 529 (2017) 263–273.
7. S. Veríssimo, K.-V. Peinemann, J. Bordado, New composite hollow fiber membrane for nanofiltration, Desalination, 184 (2005) 1–11.
8. R. Ghidossi, J.V. Daurelle, D. Veyret, P. Moulin, Simplified CFD approach of a hollow fiber ultrafiltration system, Chem. Eng. J., 123 (2006) 117–125.
9. N.C. Mat, Y. Lou, G.G. Lipscomb, Hollow fiber membrane modules, Curr. Opin. Chem. Eng., 4 (2014) 18–24.
10. L. Zhuang, H. Guo, P. Wang, G. Dai, Study on the flux distribution in a dead-end outside-in hollow fiber membrane module, J. Membr. Sci., 495 (2015) 372–383.
11. G.A. Fimbres-Weihs, D.E. Wiley, Review of 3D CFD modeling of flow and mass transfer in narrow spacer-filled channels in membrane modules, Chem. Eng. Process. Process Intensif., 49(7) (2010) 759–781.
12. H. Yu, X. Yang, R. Wang, A.G. Fane, Numerical simulation of heat and mass transfer in direct membrane distillation in a hollow fiber module with laminar flow, J. Membr. Sci., 384 (2011) 107–116.
13. X. Yang, H. Yu, R. Wang, A.G. Fane, Optimization of microstructured hollow fiber design for membrane distillation applications using CFD modeling, J. Membr. Sci., 421–422 (2012) 258–270.
14. W. Ding, Application of CFD in Membrane Technique, Verfahrenstechnik Wassertechnik, Institute für Maschinenbau, Universität Duisburg Essen, Germany, 2012.
15. S.H. Yoon, Inside-out and outside-in filtration modes in hollow fiber membrane process, 2016. Available at: http://onlinembr.info/inside-out-and-outside-in-filtration-modes-in-hollowfiber-membrane-process/ (Assessed 09 January 2018).
16. X. Guo, Y. Wang, H. Zhang, P. Li, C. Ma, Numerical and experimental investigation for cleaning process of submerged outside-in hollow fiber membrane, Water Sci. Technol., 76 (2017) 1283–1299.
17. J.I. Oh, J.W. Choi, J.L. Lim, D.I. Kim, N.S. Park, A study on hydraulic modifications of low-pressure membrane inlet structure with CFD and PIV techniques, J. Korean Soc. Environ. Eng., 37 (2015) 607–618.
18. O. Kavianipour, G.D. Ingram, H.B. Vuthaluru, Investigation into the effectiveness of feed spacer configurations for reverse osmosis membrane modules using Computational Fluid Dynamics, J. Membr. Sci., 526 (2017) 156–171.
19. Taesung S&E, CFX Manual: Lecture 10 Turbulence: Introduction to ANSYS CFX, Taesung S&E, Korea, 2016. Available at: https://www.tsne.co.kr/ (Assessed 07 November 2017).