References

  1. P.A. Owusu, S. Asumadu-Sarkodie, A review of renewable energy sources, sustainability issues and climate change mitigation: civil and environmental engineering, Cogent Eng., 3 (2016) 1–14.
  2. H.V. Lee, S.B.A. Hamid, S.K. Zain, Conversion of lignocellulosic biomass to nanocellulose: structure and chemical process, Sci. World J., 2014 (2014) 1–21.
  3. T.C. Mokhena, M.J. Mochane, T.E. Motaung, L.Z. Linganiso, O.M. Thekisoe, S.P. Songca, Sugarcane Bagasse and Cellulose Polymer Composites, in: Sugarcane - Technol. Res., 3rd ed., chapter 12, IntechOpen., 2018, pp. 225–240, doi:10.5772/ intechopen.71497.
  4. A. Balaji, B. Karthikeyan, C.S. Raj, Bagasse fiber–the future biocomposite material: a review, Int. J. Chem. Tech. Res., 7 (2015) 223–233.
  5. T. Gurunathan, S. Mohanty, S.K. Nayak, A review of the recent developments in biocomposites based on natural fibres and their application perspectives, Composites, Part A, 77 (2015) 1–25.
  6. X. Huang, Fabrication and properties of carbon fibers, Materials, 2 (2009) 2369–2403.
  7. S. Rom, J. Libra, N. Berge, E. Sabio, K. Ro, L. Li, B. Ledesma, S. Bae, Hydrothermal carbonization: modeling, final properties design and applications: a review silvia, Energies, 11 (2018) 1–28.
  8. E. Powell, Y. Lee, R. Partch, D. Dennis, T. Morey, Pi–Pi complexation of bupivacaine and analogues with aromatic receptors: implications for overdose remediation, Int. J. Nanomed., 2 (2007) 449–459.
  9. A. Greiner, S. Agarwal, J.H. Wendorff, A. Greiner, Use of electrospinning technique for biomedical applications, Polymer, 49 (2008) 5603–5621.
  10. M. Ago, K. Okajima, J.E. Jakes, S. Park, O.J. Rojas, Lignin-based electrospun nanofibers reinforced with cellulose nanocrystals, Biomacromolecules, 13 (2012) 918–926.
  11. V. Poursorkhabi, A.K. Mohanty, M. Misra, Electrospinning of aqueous lignin/poly(ethylene oxide) complexes, Appl. Polym. Sci., 132 (2015) 1–9.
  12. A. Oroumei, B. Fox, M. Naebe, Thermal and rheological characteristics of biobased carbon fiber precursor derived from low molecular weight organosolv lignin, ACS Sustainable Chem. Eng., 3 (2015) 758–769.
  13. M. Schreiber, S. Vivekanandhan, A.K. Mohanty, M. Misra, Iodine treatment of lignin-cellulose acetate electrospun fibers: enhancement of green fiber carbonization, ACS Sustainable Chem. Eng., 3 (2015) 33–41.
  14. C. Liu, K. Lai, W. Liu, R. Sun, Preparation of carbon nanofibres through electrospinning and thermal treatment, Polym. Int., 58 (2009) 1341–1349.
  15. B.M. Upton, A.M. Kasko, Strategies for the conversion of lignin to high-value polymeric materials: review and perspective, Chem. Rev., 116 (2018) 2275–2306.
  16. C. Li, X. Zhao, A. Wang, G.W. Huber, T. Zhang, Catalytic transformation of lignin for the production of chemicals and fuels, Chem. Rev., 115 (2015) 11559–11624.
  17. I. Cesarino, P. Araújo, A.P. Domingues, P. Mazzafera, An overview of lignin metabolism and its effect on biomass recalcitrance, Braz. J. Bot., 35 (2012) 303–311.
  18. F. Cotana, G. Cavalaglio, A. Nicolini, M. Gelosia, A. Petrozzi, L. Brinchi, Lignin as co-product of second generation bioethanol production from ligno-cellulosic biomass, Energy Procedia, 45 (2014) 52–60.
  19. J.S. Luterbacher, A. Azarpira, A.H. Motagamwala, F. Lu, J. Ralph, J.A. Dumesic, Lignin monomer production integrated into the c-valerolactone sugar platform, Energy Environ. Sci., 8 (2015) 2657–2663.
  20. K. Barta, G.R. Warner, E.S. Beach, P.T. Anastas, Depolymerization of organosolv lignin to aromatic compounds over Cu-doped porous metal oxides, Green Chem., 16 (2014) 191–196.
  21. J. Esteban, P. Yustos, M. Ladero, Catalytic processes from biomass-derived hexoses and pentoses: a recent literature overview, Catalysts, 8 (2018) 1–39.
  22. A. Mirabedini, J. Foroughi, G.G. Wallace, Developments in conducting polymer fibres: from established spinning methods toward advanced applications, RSC Adv., 6 (2016) 44687–44716.
  23. N. Yuan, H. Cai, T. Liu, Q. Huang, X. Zhang, Adsorptive removal of methylene blue from aqueous solution using coal fly ash-derived mesoporous silica material, Adsorpt. Sci. Technol., 37 (2019) 333–348.
  24. A. Dabrowski, Adsorption-from theory to practice, Adv. Colloid Interface Sci., 93 (2001) 135–224.
  25. J.A. Laksmono, M. Sudibandriyo, A.H. Saputra, A. Haryono, Development of porous structured polyvinyl alcohol/zeolite/ carbon composites as adsorbent, IOP Conf. Ser.: Mater. Sci. Eng., 201 (2017) 1–6.
  26. J. Sameni, S. Krigstin, D. dos Santos Rosa, A. Leao, M. Sain, Thermal characteristics of lignin residue from industrial processes, BioResources, 9 (2014) 725–737.
  27. M.F. Zainuddin, R. Shamsudin, M.N. Mokhtar, D. Ismail, Physicochemical properties of pineapple plant waste fibers from the leaves and stems of different varieties, BioResources, 9 (2014) 5311–5324.
  28. M.A. Rahandi, A. Rizkia, L. Risanto, L. Hakim, Isolation and characterization of lignin from alkaline pretreatment black liquor of oil palm empty fruit bunch and sugarcane bagasse, MEV J., 3 (2012) 1–5.
  29. A.A. Nada, R.A. Abdelazeem, A.H. Elghandour, N.Y. Abou- Zeid, Protection of conjugated linoleic acid into hydrophobic/ hydrophilic electrospun fibers, J. Drug Delivery Sci. Technol., 44 (2018) 482–490.
  30. A.A. Attia, M.S. Antonious, M.A. Shouman, A.A. Nada, K.M. Abas, Processing and fundamental characterization of carbon fibers and cellulose nanocrystals derived from bagasse, Carbon Lett., 29 (2019) 145–154.
  31. S.M. Sayyah, A. Attia, N. Fathy, M. Shouman, A. Khaliel, K. Abas, Fabrication, characterization and adsorption studies of carbon nanotubes synthesis from camphor reinforced with poly N-methyl aniline, Int. J. Adv. Res., 3 (2015) 1084–1095.
  32. A.A. Attia, M.A. Shouman, S.M. Sayyah, N.A. Fathy, A.B. Khaliel, K.M. Abas, Sequestration of methylene blue and lead ions by MWCNT modified with polyconducting polymers, Egypt. J. Chem., 60 (2017) 221–241.
  33. E. A, N. Laouedj, B. Ahmed, Effect of pH solution on the optical properties of cationic dyes in dye/maghnia montmorillonite suspensions, J. Chem. Eng. Process Technol., 2 (2011) 1–6.
  34. H. Fong, I. Chun, D.H. Reneker, Beaded nanofibers formed during electrospinning, Polymer, 40 (1999) 4585–4592.
  35. N. Bhardwaj, S.C. Kundu, Electrospinning: a fascinating fiber fabrication technique, Biotechnol. Adv., 28 (2010) 325–347.
  36. C. Merlini, G.M. de Oliveira Barra, S.D.A. da Silva Ramôa, G. Contri, R. dos Santos Almeida, M.A. d’Ávila, B.G. Soares, Electrically conductive polyaniline-coated electrospun poly(vinylidene fluoride) mats, Front Mater., 2 (2015) 1–6, doi: 10.3389/fmats.2015.00014.
  37. K. Rodríguez, J. Sundberg, P. Gatenholm, S. Renneckar, Electrospun nanofibrous cellulose scaffolds with controlled microarchitecture, Carbohydr. Polym., 100 (2014) 143–149.
  38. A. Funke, F. Ziegler, Hydrothermal carbonization of biomass: a summary and discussion of chemical mecha- nisms for process engineering, Biofuels, Bioprod. Biorefin., 4 (2010) 160–177.
  39. D.S. Ross, B.H. Loo, D.S. Tse, A.S. Hirschon, Hydrothermal treatment and the oxygen functionalities in Wyodak coal, Fuel., 70 (1991) 289–295.
  40. X. Ma, C. Yuan, X. Liu, Mechanical, microstructure and surface characterizations of carbon fibers prepared from cellulose after liquefying and curing, Materials, 7 (2014) 75–84.
  41. A. Mandal, D. Chakrabarty, Isolation of nanocellulose from waste sugarcane bagasse (SCB) and its characterization, Carbohydr. Polym., 86 (2011) 1291–1299.
  42. H. Liu, Y.L. Hsieh, Ultrafine fibrous cellulose membranes from electrospinning of cellulose acetate, J. Polym. Sci., Part B: Polym. Phys., 40 (2002) 2119–2129.
  43. Z. Ma, S. Ramakrishna, Electrospun regenerated cellulose nanofiber affinity membrane functionalized with protein A/G for IgG purification, J. Membr. Sci., 319 (2008) 23–28.
  44. S. Quillard, G. Louarn, S. Lefrant, A.G. Macdiarmid, Vibrational analysis of polyaniline: a comparative study of leucoemeraldine, emeraldine, and pernigraniline bases, Phys. Rev. B: Condens. Mater., 50 (1994) 12496–12508.
  45. B.E. Khaldi-Hansen, M. Schulze, B. Kamm, Qualitative and Quantitative Analysis of Lignins from Different Sources and Isolation Methods for an Application as a Biobased Chemical Resource and Polymeric Material, S. Vaz Jr., Ed., Analytical Techniques and Methods for Biomass, Springer International Publishing, Switzerland, 2016, pp. 1–280.
  46. J.L. Wen, B.L. Xue, S.L. Sun, R.C. Sun, Quantitative structural characterization and thermal properties of birch lignins after auto-catalyzed organosolv pretreatment and enzymatic hydrolysis, J. Chem. Technol. Biotechnol., 88 (2013) 1663–1671.
  47. A. Alzagameem, B.E. Khaldi-Hansen, D. Büchner, M. Larkins, B. Kamm, S. Witzleben, M. Schulze, Lignocellulosic biomass as source for lignin-based environmentally benign antioxidants, Molecules, 23 (2018) 1–25.
  48. X.Z. Tang, B. Yu, R.V. Hansen, X. Chen, X. Hu, J. Yang, Grafting low contents of branched polyethylenimine onto carbon fibers to effectively improve their interfacial shear strength with an epoxy matrix, Adv. Mater. Interfaces, 2 (2015) 1–7.
  49. T.A. Khan, A. Gupta, S.S. Jamari, R. Jose, M. Nasir, A. Kumar, Synthesis and characterization of carbon fibers and their application in wood composites, BioResources, 8 (2013) 4171–4184.
  50. M. Oschatz, R. Walczak, Crucial factors for the application of functional nanoporous carbon-based materials in energy and environmental applications, C. J. Carbon Res., 4 (2018) 1–22, doi: 10.3390/c4040056.
  51. Z. Li, H. Zhang, Q. Liu, L. Sun, L. Stanciu, J. Xie, Fabrication of high-surface-area graphene/polyaniline nanocomposites and their application in supercapacitors, ACS Appl. Mater. Interfaces, 5 (2013) 2685–2691.
  52. M.A. Al-Ghouti, J. Li, Y. Salamh, N. Al-laqtah, G. Walker, M.N.M. Ahmad, Adsorption mechanisms of removing heavy metals and dyes from aqueous solution using date pits solid adsorbent, J. Hazard. Mater., 176 (2010) 510–520.
  53. A.P. Mathew, Z. Karim, M. Grahn, J. Mouzon, M.K. Oksman, Nanoporous membranes with cellulose nanocrystals as functional entity in chitosan: removal of dyes from water, Carbohydr. Polym., 112 (2014) 668–676.
  54. C. Kaewprasit, E. Hequet, N. Abidi, J.P. Gourlot, Application of methylene blue adsorption to cotton fiber specific surface area measurement: part I. Methodology, J. Cotton Sci., 2 (1998) 164–173.
  55. A.H. Norzilah, A. Fakhru’L-Razi, T.S.Y. Choong, A.L. Chuah, Surface modification effects on CNTs adsorption of methylene blue and phenol, J. Nanomater., 2011 (2011) 1–18.
  56. L.W. Low, T.T. Teng, A. Ahmad, N. Morad, Y.S. Wong, A novel pretreatment method of lignocellulosic material as adsorbent and kinetic study of dye waste adsorption, Water Air Soil Pollut., 218 (2011) 293–306.
  57. M. Maruthapandi, V.B. Kumar, J.H.T. Luong, A. Gedanken, Kinetics, isotherm, and thermodynamic studies of methylene blue adsorption on polyaniline and polypyrrole macronanoparticles synthesized by C-dot-initiated polymerization, ACS Omega, 3 (2018) 7196–7203.
  58. J.L. Gong, B. Wang, G.M. Zeng, C.P. Yang, C.G. Niu, Q.Y. Niu, W.J. Zhou, Y. Liang, Removal of cationic dyes from aqueous solution using magnetic multi-wall carbon nanotube nanocomposite as adsorbent, J. Hazard. Mater., 164 (2009) 1517–1522.
  59. A.C. Baptista, I. Ropio, B. Romba, J.P. Nobre, C. Henriques, J.C. Silva, J.I. Martins, J.P. Borges, I. Ferreira, Cellulose-based electrospun fibers functionalized with polypyrrole and polyaniline for fully organic batteries, J. Mater. Chem. A, 6 (2018) 256–265.
  60. V. Davé, A. Prasad, H. Marand, W.G. Glasser, Molecular organization of lignin during carbonization, Polymer, 34 (1993) 3144–3154.
  61. Y. Kaitsuka, N. Hayashi, T. Shimokawa, E. Togawa, H. Goto, Synthesis of polyaniline (PANI) in nano-reaction field of cellulose nanofiber (CNF), and carbonization, Polymers, 8 (2016) 1–12.
  62. P.C. Rodrigues, M. Muraro, C.M. Garcia, G.P. Souza, M. Abbate, W.H. Schreiner, M.A.B. Gomes, Polyaniline/lignin blends: thermal analysis and XPS, Eur. Polym. J., 37 (2001) 2217–2223.
  63. M.A. Salami, F. Kaveian, M. Rafienia, S. Saber-Samandari, A. Khandan, M. Naeimi, Electrospun polycaprolactone/ligninbased nanocomposite as a novel tissue scaffold for biomedical applications, J. Med. Signals Sens., 7 (2017) 228–238.
  64. M. Kancheva, A. Toncheva, N. Manolova, I. Rashkov, Enhancing the mechanical properties of electrospun polyester mats by heat treatment, Express Polym. Lett., 9 (2015) 49–65.