References

  1. Y.T. Cai, The harm of electroplating wastewater on human body and its central treatment, Agro-Environ. Sci., 29 (2010) 205–208.
  2. L.Y. Chai, Q.Z. Li, Q.Q. Wang, X. Yan, Solid-liquid separation: an emerging issue in heavy metal wastewater treatment, Environ. Sci. Pollut. Res., 25 (2018) 17250–17267.
  3. W. Wang, H.J. Han, M. Yuan, H.Q. Li, F. Fang, K. Wang, Treatment of coal gasification wastewater by a two-continuous UASB system with step-feed for COD and phenols removal, Bioresour. Technol., 102 (2011) 5454–5460.
  4. H.J. Lu, J.K. Wang, J. Yu, Y.F. Wu, T. Wang, Y. Bao, D. Ma, H.X. Hao, Chemical engineering thermodynamics: Phase equilibria for the pseudo-ternary system (NaCl+Na2SO4+H2O) of coal gasification wastewater at T = (268.15 to 373.15) K, Chin. J. Chem. Eng., 653 (2016) 955–962.
  5. A. Christ, K. Regenauer-Lieb, H.T. Chua, Boosted multi-effect distillation for sensible low-grade heat sources: a comparison with feed pre-heating multi-effect distillation, Desalination, 15 (2015) 32–46.
  6. M.A. Jamil, S.M. Zubair, Effect of feed flow arrangement and number of evaporators on the performance of multieffect mechanical vapor compression desalination systems, Desalination, 429 (2018) 76–87.
  7. R.K. McGovern, G.P. Thiel, G. Prakash Narayan, S.M. Zubair, J.H. Lienhard V, Performance limits of zero and single extraction humidification–dehumidification desalination systems, Appl. Energy, 102 (2013) 1081–1090.
  8. L. Chen, C. Chen, J. Yu, S. Jin, Study on the heat and mass transfer characteristics of spray separation tower at low temperature and normal pressure, Int. J. Heat Mass Transfer, 153 (2020) 119662, doi: 10.1016/j.ijheatmasstransfer.2020.119662.
  9. S. Wang, T. Langrish, A review of process simulations and the use of additives in spray drying, Food Res. Int., 42 (2009) 13–25.
  10. F.Y. Zhang, H. Hao, X. Li, H.-X. Li, Y.L. Zhao, Study on spraydrying process for waste liquor from paper mill, Chem. Eng. (China), 36 (2008) 1–4.
  11. T. Rouissi, A. Mahmoudi, R.D. Tyagi, S.K. Brar, D. Prèvost, R.Y. Surampalli, Optimisation of spray drying by response surface methodology for the production of Sinorhizobium meliloti powder formulation by using starch industry wastewater, Biosyst. Eng., 114 (2013) 334–343.
  12. A.N. Chasekioglou, A.M. Goula, K.G. Adamopoulos, H.N. Lazarides, An approach to turn olive mill wastewater into a valuable food by-product based on spray drying in dehumidified air using drying aids, Powder Technol., 311 (2017) 376–389.
  13. L. Chen, Investigation on Performance of Heat Pump Air Circulation Evaporation Separation System for Plating Wastewater, Nanjing Tech University, Nanjing, 2020.
  14. S.A. El-Agouz, G.B. Abd El-Aziz, A.M. Awad, Solar desalination system using spray evaporation, Energy, 76 (2014) 276–283.
  15. A. Fouda, S.A. Nada, H.F. Elattar, S. Rubaiee, A. Al-Zahrani, Performance analysis of proposed solar HDH water desalination systems for hot and humid climate cities, Appl. Therm. Eng., 144 (2018) 81–95.
  16. F. Farahbod, D. Mowla, M.R. Jafari Nasr, M. Soltanieh, Experimental study of forced circulation evaporator in zero discharge desalination process, Desalination, 285 (2012) 352–358.
  17. X.N. Fei, C. Lei, D. Yuman, J. Min, J.P. Fu, CFD modeling and analysis of brine spray evaporation system integrated with solar collector, Desalination, 366 (2015) 139–145.
  18. Q. Chen, M. Kum Ja, Y. Li, K.J. Chua, Evaluation of a solarpowered spray-assisted low-temperature desalination technology, Appl. Energy, 211 (2018) 997–1008.
  19. J. Yu, S.M. Jin, Y.J. Xia, Experimental and CFD investigation of the counter-flow spray concentration tower in solar energy air evaporating separation saline wastewater treatment system, Int. J. Heat Mass Transfer, 144 (2019) 118621, doi: 10.1016/j. ijheatmasstransfer.2019.118621.
  20. R.J. Moffat, Describing the uncertainties in experimental results, Exp. Therm. Fluid Sci., 1 (1988) 3–17.
  21. M.H. Sadafi, I. Jahn, A.B. Stilgoe, K. Hooman, Theoretical and experimental studies on a solid containing water droplet, Int. J. Heat Mass Transfer, 78 (2014) 25–33.
  22. S.A. Morsi, A.J. Alexander, An investigation of particle trajectories in two-phase flow systems, J. Fluid Mech., 55 (1972) 193–208.
  23. S.S. Sazhin, Advanced models of fuel droplet heating and evaporation, Prog. Energy Combust. Sci., 32 (2006) 162–214.
  24. A.S. Mujumdar, Handbook of Industrial Drying, 4th ed., CRC Press, Boca Raton, BR, USA, 2014.
  25. T.T.H. Tran, M. Jaskulski, J.G. Avila-Acevedo, E. Tsotsas, Model parameters for single-droplet drying of skim milk and its constituents at moderate and elevated temperatures, Drying Technol., 35 (2017) 444–464.
  26. M.H. Sadafi, I. Jahn, A.B. Stilgoe, K. Hooman, Theoretical and experimental studies on a solid containing water droplet, Int. J. Heat Mass Transfer, 78 (2014) 25–33.