References

  1. USEPA, Guidance for water-quality-based decisions: The TMDL process., USEPA Washington, DC, 1991.
  2. R. Canale and D. Seo, Performance, reliability and uncertainty of total phosphorus models for lakes--II. Stochastic analyses. Water Res., 30(1) (1996) 95–102.
  3. H. Zhang, The critical flow-storm approach and uncertainty analysis for the TMDL development process, PhD Dissertation, Department of Civil Engineering, University of Virginia, Charlottesville, VA, 2000.
  4. H. Zhang and S. Yu, Applying the first-order error analysis in determining the margin of safety for total maximum daily load computations. J. Environ. Eng., 130(6) (2004) 664–673.
  5. D. Dilks and P. Freedman, Improved consideration of the margin of safety in total maximum daily load development. J. Environ. Eng., 130(6) (2004) 690–694.
  6. NRC, The National Academy of Sciences’ National Research Council report on assessing the scientific basis of the total maximum daily load approach to water quality management : hearing before the Subcommittee on Water Resources and Environment of the Committee on Transportation and Infrastructure, House of Representatives, United States Congress. House. Committee on Transportation and Infrastructure. Subcommittee on Water Resources and Environment, Washington, DC, 2001.
  7. S. Chapra, Engineering water quality models and TMDLs. J. Water Res. Planning Manage., 129(4) (2003) 247–256.
  8. K. Reckhow, On the need for uncertainty assessment in TMDL modeling and implementation. J. Water Res. Planning Manage., 129(4) (2003) 245–246.
  9. K. Reckhow and S. Chapra, Engineering Approaches For Lake Management Volume 1: Data Analysis and Empirical Modeling, Butterworth, 1983.
  10. L. Brown and T. Barnwell, The enhanced stream water quality models QUAL2E and QUAL2E-UNCAS: Documentation and User Manual, EPA/600/3-87/007, 1987.
  11. W. Walker, Quantifying uncertainty in phosphorus TMDL’s for Lakes, W.W.J. Walker, ed., NE Interstate Water Pollution Control Commission and USEPA Region I, 2001, p. 22.
  12. W. Walker, Consideration of variability and uncertainty in phosphorus total maximum daily loads for lakes. J. Water Res. Planning Manage., 129(4) (2003) 337–344.
  13. K. Kane, Methodology for calculating Phase II total maximum daily loads (TMDLs) of phosphorus for New York City drinking water reservoirs, New York City Department of Environmental Protection, 1999.
  14. R. Spear and G. Hornberger, Eutrohpication in Peel Inlet-II. Identification of critical uncertainties via generalized sensitivity analysis. Water Res., 14 (1980) 43–49.
  15. B. Van Harn Adams, Parameter Distributions for Uncertainty Propagation in Water Quality Modeling, Nicholas School of the Environment and Earth Sciences, Duke University, Durham, NC, 1998.
  16. J. Benaman and C.A. Shoemaker, Methodology for analyzing ranges of cncertain model parameters and their impact on total maximum daily load process. J. Environ. Eng., 130(6) (2004) 648– 656.
  17. K. Beven and A. Binley, The future of distributed models—model calibration and uncertainty prediction. Hydrol. Pro., 6(3) (1992) 279–298.
  18. C. Stow, K. Reckhow, S. Qian, C. Lamon, G. Arhonditsis, M. Borsuk and D. Seo, Evaluating parameter uncertainty in water quality models: An imperative for adaptive TMDL implementation. J. Am. Water Res. Assoc., 43(6) (2007) 1499–1507.