References

  1. M. Henze, C.P.L. Grady, W. Gujer, G.v.R. Marais and T. Matsuo, Activated Sludge Model No. 1, IAWPRC Publishing, 1987.
  2. M. Henze, W. Gujer, T. Mino, T. Matsuo, M.C. Wentzel and G.v.R. Marais, Activated Sludge Model No. 2, IAWQ Publishing, 1995.
  3. M. Henze, W. Gujer, T. Mino, T. Matsuo, M. C. Wentzel, G.v.R. Marais and M.C.M. van Loosdrecht, Activated Sludge Model No. 2d, Water Sci. Technol., 39 (1999) 165–182.
  4. W. Gujer, M. Henze, T. Mino and M.C.M. van Loosdrecht, Activated Sludge Model No. 3, Water Sci. Technol., 39 (1999) 183– 193.
  5. M. Henze, W. Gujer, T. Mino and M.C.M. van Loosdrecht, eds., Activated sludge models: ASM1, ASM2, ASM2d and ASM3, IWA Publishing, 2000.
  6. W. Rauch and P. Harremoes, Genetic algorithms in real time control applied to minimize transient pollution from urban wastewater systems, Water Res., 33 (1999) 1265–1277.
  7. B. Petersen, K. Gernaey, M. Henze and P.A. Vanrolleghem, Evaluation of an ASM1 model calibration procedure on a municipal– industrial wastewater treatment plant, J. Hydroinform., 4 (2002) 15–38.
  8. J.J.W. Hulsbeek, J. Kruit, P.J. Roeleveld and M.C.M. van Loosdrecht, A practical protocol for dynamic modelling of activated sludge systems, Water Sci. Technol., 45 (2002) 127–136.
  9. G. Langergraber, L. Rieger, S. Winkler, J. Alex, J. Wiese, C. Owerdieck, M. Ahnert, J. Simon and M. Maurer, A guideline for simulation studies of wastewater treatment plants, Water Sci. Technol., 50 (2004) 131–138.
  10. H. Melcer, P.L. Dold, R.M. Jones, C.M. Bye, I. Takacs, H.D. Stensel, A.W. Wilson, P. Sun and S. Bury, Methods for wastewater characterisation in activated sludge modeling, Water Environment Research Foundation (WERF), Alexandria, 2003.
  11. G. Sin, S.W.H. van Hulle, D.J.W. De Pauw, A. van Griensven and P.A. Vanrolleghem, A critical comparison of systematic calibration protocols for activated sludge models: A SWOT analysis, Water Res., 39 (2005) 2459–2474.
  12. R. Brun, M. Kühni, H. Siegrist, W. Gujer and P. Reichert, Practical identifiability of ASM2d parameters — systematic selection and tuning of parameter subsets, Water Res., 36 (2002) 4113–4127.
  13. J.R. Kim, J.H. Ko, J.J. Lee, S.H. Kim, T.J. Park, C.W. Kim and H.J. Woo, Parameter sensitivity analysis for activated sludge models No. 1 and 3 combined with one-dimensional settling model, Water Sci. Technol., 53 (2006) 129–138.
  14. J.B. Copp, H. Spanjers and P.A. Vanrolleghem, Respirometry in control of the activated sludge process: Benchmarking control strategies, IWA Publishing, 2002.
  15. S.H. Lee, J.H. Ko, K.M. Poo, T.H. Lee, H.J. Woo and C.W. Kim, Practical approach to parameter estimation for ASM3+bio-P module applied to five-stage step-feed EBPR process, Water Sci. Technol., 53 (2006) 139–148.
  16. S.H. Lee, J.H. Ko, J.B. Pak, J.H. Im, J.R. Kim, J.J. Lee and C.W. Kim, Use of Activated Sludge Model No. 3 and Bio-P module for simulating five-stage step-feed enhanced biological phosphorous removal process, Kor. J. Chem. Eng., 23 (2006) 203–208.
  17. J.R. Kim, J.H. Ko, J.H. Im, S.H. Lee, S.H. Kim, C.W. Kim and T.J. Park, Forecasting influent flow rate and composition with occasional data for supervisory management system by time series model, Water Sci. Technol., 53 (2006) 185–192.
  18. I. Takacs, G.G. Party and D. Nolasco, A dynamic model of the clarification-thickening process, Water Res., 25 (1991) 1263–1271.
  19. L. Rieger, G. Koch, M. Kuhni, W. Gujer and H. Siegrist, The EAWAG bio-P module for Activated Sludge Model No. 3, Water Res., 35 (2001) 3887–3903.
  20. D.E Goldberg, Genetic Algorithms in Search, Optimization and Machine Learning, Addison-Wesley, Reading, 1989.